show redundancyDisplay the current redundancy configuration (status of automatic reboot configuration on stackmanagement unit).S4810Syntax show redundancyCommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version8.3.19.0Introduced on the S4820T.Version 8.3.7.0 Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 7.7.1.0 Introduced on the S-Series.UsageInformationTo modify your results, use the show redundancy [pipe] command, as follows:• except — show only text that doesn not match a pattern.• find — search for the first occurrence of a pattern.• grep — show only text that matches a pattern.• no-more — do not paginate the output.• save — save the output to a file.Example Dell#show redundancyDell#show redundancy-- SSeries Redundancy Configuration --------------------------------------------------Auto reboot : Enabled-- Stack-unit Status --------------------------------------------------Mgmt ID: 0Stack-unit ID: 0Stack-unit Redundancy Role: PrimaryStack-unit State: ActiveStack-unit SW Version: 7.7.1.0Link to Peer: Up-- PEER Stack-unit Status --------------------------------------------------Stack-unit State: StandbyPeer stack-unit ID: 1Stacking 1611
