Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version8.3.16.0Introduced on MXL 10/40GbE Switch IO Module.Example Dell# show isci sessionSession 0:------------------------------------------------------Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajgISID: 400001370000Session 1:---------------------------------------------------------Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajgISID: 400001370000.UsageInformationOnly sessions the switch observes are learned; sessions flowing through anadjacent switch are not learned.After the switch is reloaded, any information exchanged during the initialhandshake is not available. If the switch picks up the communication afterreloading, it would detect a session was in progress but could not obtain completeinformation for it. Any incomplete information of this type would not be available inthe show commands.RelatedCommands • show iscsi — displays the currently configured iSCSI settings.• show iscsi session detailed — displays detailed information about active iSCSIsessions on the switch.• show run iscsi — shows run iscsi.show iscsi session detailedDisplay detailed information on active iSCSI sessions on the switch.S4810Syntax show iscsi session detailed [session isid]Parameters isid Enter the session’s iSCSi ID to display detailed informationabout the specified iSCSi session.950 iSCSI Optimization
