Example Dell#show ip rip databaseTotal number of routes in RIP database: 1624204.250.54.0/24[50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15204.250.54.0/24 auto-summary203.250.49.0/24[50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14203.250.49.0/24 auto-summary210.250.40.0/24[50/2] via 1.1.18.2, 00:00:14, Vlan 18[50/2] via 1.1.130.2, 00:00:12, Port-channel 30210.250.40.0/24 auto-summary207.250.53.0/24[50/2] via 1.1.120.2, 00:00:55, Port-channel 20[50/2] via 1.1.130.2, 00:00:12, Port-channel 30[50/2] via 1.1.10.2, 00:00:18, Vlan 10207.250.53.0/24 auto-summary208.250.42.0/24[50/2] via 1.1.120.2, 00:00:55, Port-channel 20[50/2] via 1.1.130.2, 00:00:12, Port-channel 30[50/2] via 1.1.10.2, 00:00:18, Vlan 10208.250.42.0/24 auto-summaryshow running-config ripDisplay the current RIP configuration.S4810Syntax show running-config ripDefaults noneCommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.Version 7.6.1.0 Introduced on the E-Series.1404 Routing Information Protocol (RIP)
