size date time name-------- ------ ------ --------512 Jul-20-2004 18:15:00 tgtimg512 Jul-20-2004 18:15:00 diagnostic512 Jul-20-2004 18:15:00 other512 Jul-20-2004 18:15:00 tgt226 Transfer complete329 bytes received in 0.018 seconds (17.95 Kbytes/s)ftp>ftp-server topdirSpecify the top-level directory to be accessed when an incoming FTP connection request is made.S4810Syntax ftp-server topdir directoryParameters directory Enter the directory path.Defaults The internal flash is the default directory.CommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version 9.0.0.0 Introduced on the Z9000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series Original command.UsageInformationAfter you enable FTP server functions with the ftp-server enable command,Dell Networking recommends specifying a top-level directory path. Without a top-level directory path specified, the Dell Networking OS directs users to the flashdirectory when logging in to the FTP server.106 Control and Monitoring
