CommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.2(0.2) Introduced on the Z9000.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.debug isis local-updatesTo debug IS-IS local update packets, enable debugging on a specific interface and provides diagnosticinformation.S4810Syntax debug isis local-updates [interface]To turn off debugging, use the no debug isis local-updates [interface]command.Parameters interface (OPTIONAL) Identifies the interface type slot/port as one ofthe following:• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.• For a Gigabit Ethernet interface, enter the keywordGigabitEthernet then the slot/port information.• For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a VLAN, enter the keyword vlan then a number from1 to 4094.CommandModesEXEC Privilege960 Intermediate System to Intermediate System (IS-IS)
