Example(Detail)Dell#show bfd neighbors detailSession Discriminator: 1Neighbor Discriminator: 1Local Addr: 10.1.3.2Local MAC Addr: 00:01:e8:02:15:0eRemote Addr: 10.1.3.1Remote MAC Addr: 00:01:e8:27:2b:f1Int: GigabitEthernet 1/3State: UpConfigured parameters:TX: 100ms, RX: 100ms, Multiplier: 3Neighbor parameters:TX: 250ms, RX: 300ms, Multiplier: 4Actual parameters:TX: 300ms, RX: 250ms, Multiplier: 3Role: ActiveDelete session on Down: FalseClient Registered: CLIUptime: 00:02:04Statistics:Number of packets received from neighbor: 376Number of packets sent to neighbor: 314Number of state changes: 2Number of messages from IFA about port state change: 0Number of messages communicated b/w Manager and Agent: 6Dell#RelatedCommandsbfd neighbor — establishes a BFD session with a neighbor.bfd all-neighbors — establishes BFD sessions with all neighbors discovered by theIS-IS protocol or OSPF protocol out of all interfaces.vrrp bfd neighborEstablish a BFD for VRRP session with a neighbor.S4810Syntax vrrp bfd neighbor ip-addressTo remove the BFD session with the neighbor, use the no vrrp bfd neighborip-address command.Parameters ip-address Enter the IP address of the neighbor in dotted decimalformat (A.B.C.D).Defaults noneCommandModesINTERFACEBidirectional Forwarding Detection (BFD) 371
