Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.Version 6.5.1.0 Introduced on the E-Series.UsageInformationMessages can contain an unlimited number of lines; however, each line is limitedto 255 characters. To move to the next line, use . To send the message useCTR-Z; to abort a message, use CTR-C.service timestampsTo debug and log messages, add time stamps. This command adds either the uptime or the current timeand date.S4810Syntax service timestamps [debug | log] [datetime [localtime] [msec][show-timezone] | uptime]To disable timestamping, use the no service timestamps [debug | log]command.Parameters debug (OPTIONAL) Enter the keyword debug to add timestamps todebug messages.log (OPTIONAL) Enter the keyword log to add timestamps tolog messages with severity from 0 to 6.datetime (OPTIONAL) Enter the keyword datetime to have thecurrent time and date added to the message.localtime (OPTIONAL) Enter the keyword localtime to include thelocaltime in the timestamp.msec (OPTIONAL) Enter the keyword msec to include millisecondsin the timestamp.show-timezone(OPTIONAL) Enter the keyword show-timezone to includethe time zone information in the timestamp.uptime (OPTIONAL) Enter the keyword uptime to have thetimestamp based on time elapsed since system reboot.Defaults Not configured.CommandModesCONFIGURATION126 Control and Monitoring
