CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.Version 7.6.1.0 Introduced on the S-Series and C-Series.pre-Version6.1.1.1Introduced on the E-Series.UsageInformationOn 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, forsome values, the shaped rate is much less than the value configuredNOTE: When packets of size greater than 7000 bytes are expected to bereceived from the network, Dell Networking recommends that you configurethe burst value to be more than 175 KB if you configured the rate shape. Sucha setting ensures proper bandwidth sharing across queues.RelatedCommandsrate-shape — shapes traffic output as part of the designated policy.service-class dot1p-mappingConfigure a service-class criterion based on a dot1p value.S4810Syntax service-class dot1p-mapping {dot1p0 queue | dot1p1 queue |dot1p2 queue | dot1p3 queue | dot1p4 queue| dot1p5 queue |dot1p6 queue | dot1p7 queue}Parameters queue Enter a value from 0 to 7.Defaults For each dot1p Priority, the default CoS queue value is:• Dot1p Priority : 0 1 2 3 4 5 6 7• Queue : 2 0 1 3 4 5 6 7CommandModesCONFIGURATIONQuality of Service (QoS) 1331
