Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the C-Series and S-Series.RelatedCommandsprivate-vlan mode — sets the mode of the selected VLAN to community, isolated,or primary.private-vlan mapping secondary-vlan — maps secondary VLANs to the selectedprimary VLAN.show arp — displays the ARP table.switchport mode private-vlan — sets PVLAN mode of the selected port.private-vlan modeSet PVLAN mode of the selected VLAN to community, isolated, or primary.S4810Syntax [no] private-vlan mode {community | isolated | primary}To remove the PVLAN configuration, use the no private-vlan mode{community | isolated | primary} command syntax.Parameters community Enter the keyword community to set the VLAN as acommunity VLAN.isolated Enter the keyword isolated to configure the VLAN as anisolated VLAN.primary Enter the keyword primary to configure the VLAN as aprimary VLAN.Defaults noneCommandModesINTERFACE VLANCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Private VLAN (PVLAN) 1307
