bgp asnotationAllows you to implement a method for AS number representation in the command line interface (CLI).S4810Syntax bgp asnotation [asplain | asdot+ | asdot]To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgpasnotation command.Defaults asplainCommandModesROUTER BGPCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.3.1.0 Introduced the dynamic application of AS notation changesVersion 8.2.1.0 IntroducedUsageInformationBefore enabling this feature, enable the enable bgp four-octet-as-supportcommand. If you disable the four-octect-support command afterusing dot or dot+ format, the AS numbers revert to asplain text.When you apply an asnotation, it is reflected in the running-configuration. If youchange the notation type, the running-config updates dynamically and the newnotation shows.Example Dell(conf)#router bgp 1Dell(conf-router_bgp)#bgp asnotation asdotDell(conf-router_bgp)#exDell(conf)#do show run | grep bgprouter bgp 1bgp four-octet-as-supportbgp asnotation asdotDell(conf)#router bgp 1Dell(conf-router_bgp)#bgp asnotation asdot+Dell(conf-router_bgp)#exDell(conf)#do show run | grep bgp378 Border Gateway Protocol
