default-information originateGenerates a default route into an IS-IS routing domain and controls the distribution of defaultinformation.S4810Syntax default-information originate [always] [metric metric] [route-map map-name]To disable the generation of a default route into the specified IS-IS routing domain,use the no default-information originate [always] [metric metric][route-map map-name] command.Parameters always (OPTIONAL) Enter the keyword always to have the defaultroute always advertised.metric metric (OPTIONAL) Enter the keyword metric then a number toassign to the route. The range is from 0 to 16777215.route-mapmap-name(OPTIONAL) A default route the routing process generates ifthe route map is satisfied.Defaults Not configured.CommandModes • ROUTER ISIS (for IPv4)• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version8.3.12.0Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 7.5.1.0 Added IPv6 ISIS support.Version 6.3.1.0 Introduced.UsageInformationWhen you use this command to redistribute routes into a routing domain, therouter becomes an autonomous system (AS) boundary router. An AS boundaryrouter does not always generate a default route into a routing domain. The routerstill requires its own default route before it can generate one.How a metric value assigned to a default route advertises depends on the metric-style command configuration. If the metric-style command is set for Narrow964 Intermediate System to Intermediate System (IS-IS)
