Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.9.1.0 Introduced VRF on the E-Series.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.2.1.1Introduced on the E-Series.UsageInformationUse the vrf vrf-name attribute of this command to clear routes correspondingto either a specific VRF or the default VRF.You cannot use this attribute to clear routes corresponding to a management VRF.RelatedCommandsip route — assigns an IP route to the switch.show ip route — views the routing table.show ip route summary — views a summary of the routing table.clear tcp statisticsClear TCP counters.S4810Syntax clear tcp statistics [all | cp | rp1 | rp2]Parameters all Enter the keyword all to clear all TCP statistics maintainedon all switch processors.cp (OPTIONAL) Enter the cp to clear only statistics from theControl Processor.rp1 (OPTIONAL) Enter the keyword rp1 to clear only thestatistics from Route Processor 1.rp2 (OPTIONAL) Enter the keyword rp2 to clear only thestatistics from Route Processor 2.840 IPv4 Routing
