dei enableMake packets eligible for dropping based on their DEI value.S4810Syntax dei enableDefaults Packets are colored green; no packets are dropped.CommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.3.1.0 Introduced on the C-Series and S-Series.dei honorHonor the incoming DEI value by mapping it to an Dell Networking OS drop precedence. Enter thecommand once for 0 and once for 1.S4810Syntax dei honor {0 | 1} {green | red | yellow}Parameters 0 | 1 Enter the bit value you want to map to a color.green | red |yellowChoose a color:• Green: High priority packets that are the least preferredto be dropped.• Yellow: Lower priority packets that are treated as best-effort.• Red: Lowest priority packets that are always dropped(regardless of congestion status).Defaults Disabled; Packets with an unmapped DEI value are colored green.1690 VLAN Stacking
