Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series and E-Series.E-Series Original command.RelatedCommandsexit — returns to the lower command mode.exec-bannerEnable the display of a text string when the user enters EXEC mode.S4810Syntax exec-bannerTo disable the banner on terminal lines, use the no exec-banner command.Defaults Enabled on all lines (if configured, the banner appears).CommandModesLINECommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.7.0 Introduced on the S4810.Version 8.3.11.1 Introduced on the Z9000.Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series Original command.UsageInformationOptionally, use the banner exec command to create a text string that is displayedwhen you access EXEC mode. This command toggles that display.RelatedCommandsline — enables and configures console and virtual terminal lines to the system.102 Control and Monitoring
