Version 8.1.1.0 Introduced on the E-Series ExaScale.Version 7.8.1.0 Increase the name string to accept up to 140 characters.Prior to 7.8.1.0, names were up to 16 characters long.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.pre-Version6.2.1.1Introduced on the E-Series.RelatedCommandsip prefix-list — configures a prefix list.denyTo drop packets meeting the criteria specified, configure a filter.S4810Syntax deny ip-prefix [ge min-prefix-length] [le max-prefix-length]To delete a drop filter, use the no deny ip-prefix command.Parameters ip-prefix Specify an IP prefix in the network/length format. Forexample, 35.0.0.0/ 8 means match the first 8 bits of address35.0.0.0.ge min-prefix-length(OPTIONAL) Enter the keyword ge and then enter theminimum prefix length, which is a number from zero (0) to32.le max-prefix-length(OPTIONAL) Enter the keyword le and then enter themaximum prefix length, which is a number from zero (0) to32.Defaults Not configured.CommandModesPREFIX-LISTCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Access Control Lists (ACL) 263
