show snmpDisplay the status of SNMP network elements.S4810Syntax show snmpCommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.6.1.0 Introduced on the S-Series.Version 7.5.1.0 Introduced on the C-Series.E-Series legacycommandExample Dell#show snmp32685 SNMP packets input0 Bad SNMP version errors0 Unknown community name0 Illegal operation for community name supplied0 Encoding errors96988 Number of requested variables0 Number of altered variables31681 Get-request PDUs968 Get-next PDUs0 Set-request PDUs61727 SNMP packets output0 Too big errors (Maximum packet size 1500)9 No such name errors0 Bad values errors0 General errors32649 Response PDUs29078 Trap PDUsDell#RelatedCommandssnmp-server community — enables the SNMP and set community string.Simple Network Management Protocol (SNMP) and Syslog 1555
