Fields DescriptionProtocol States whether IP is enabled (up) or disabled (down) on theinterface.Example (Brief) Dell#show ip int briefInterface IP-Address OK? MethodStatus ProtocolGigabitEthernet 1/0 unassigned NO Manual administrativelydown downGigabitEthernet 1/1 unassigned NO Manual administrativelydown downGigabitEthernet 1/2 unassigned YES Manualup upGigabitEthernet 1/3 unassigned YES Manualup upGigabitEthernet 1/4 unassigned YES Manualup upGigabitEthernet 1/5 10.10.10.1 YES Manualup upGigabitEthernet 1/6 unassigned NO Manual administrativelydown downshow ip management-routeView the IP addresses assigned to the Management interface.S4810Syntax show ip management-route [all | connected | summary | static]Parameters all (OPTIONAL) Enter the keyword all to view all IP addressesassigned to all Management interfaces on the switch.connected (OPTIONAL) Enter the keyword connected to view onlyroutes directly connected to the Management interface.summary (OPTIONAL) Enter the keyword summary to view a tablelisting the number of active and non-active routes and theirsources.static (OPTIONAL) Enter the keyword static to view non-activeroutes also.CommandModes • EXEC• EXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.892 IPv4 Routing
