CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.Version 7.5.1.0 Introduced on the E-Series.show cam mac linecard (count)Display the content addressable memory (CAM) size and the portions allocated for MAC addresses andfor MAC ACLs.S4810Syntax show cam mac linecard slot port-set port-pipe count [vlan vlan-id] [interface interface]Parameters linecard slot (REQUIRED) Enter the keyword linecard then a slotnumber to select the linecard for which to gatherinformation.port-set port-pipe(REQUIRED) Enter the keywords port-set then a Port-Pipenumber to select the Port-Pipe for which to gatherinformation.count (REQUIRED) Enter the keyword count to display CAM usageby interface type.interfaceinterface(OPTIONAL) Enter the keyword interface then theinterface type, slot and port information:• For a Port Channel interface, enter the keywords port-channel then a number.• For a SONET interface, enter the keyword sonet then theslot/ port information.• For a 10-Gigabit Ethernet interface, enter the keywordTenGigabitEthernet then the slot/port information.• For a 40-Gigabit Ethernet interface, enter the keywordfortyGigE then the slot/port information.1038 Layer 2
