CommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.neighbor advertisement-startTo send BGP routing updates, set the minimum interval before starting.S4810Syntax neighbor {ip-address} advertisement-start secondsTo return to the default value, use the no neighbor {ip-address}advertisement-start command.Parameters ip-address (OPTIONAL) Enter the IP address of the neighbor in dotteddecimal format.seconds Enter a number as the time interval, in seconds, before BGProute updates are sent. The range is from 0 to 3600 seconds.Defaults noneCommandModesROUTER BGPCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Border Gateway Protocol 415
