tacacs-server groupCreates a group of TACACS servers to be used for Authentication, Authorization, and Accounting..S4810Syntax aaa tacacsgroup group-nameTo delete a group of TACACS servers, use the no tacacs-server groupgroup-name command.Parameters group-name Enter the name of the TACACS server group.Defaults Not configured.CommandModesCONFIGURATIONCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.4.(0.0)Introduced on the S-Series and Z-Series.UsageInformationIf the TACACS group is not configured for Authentication, Authorization, andAccounting, then globally configured TACACS servers are used for the purposes.When the TACACS group is removed, the AAA configuration is also removed.Example Dell(conf)#tacacs-server group group1Dell(conf-tacacs-group)#tacacs-server host 1.1.1.1 key secretDell(conf-tacacs-group)#tacacs-server host 2.2.2.2 key secretDell(conf-tacacs-group)#tacacs-server vrf vrf1 source-interface tengigabitethernet 0/36Dell(conf)#exitDell(conf)#aaa tacacsgroup group1RelatedCommandsaaa authentication login — specifies the login authentication method.tacacs-server key — configures a TACACS+ key for the TACACS server.debug tacacs+To assist with troubleshooting, view TACACS+ transactions.S4810Syntax debug tacacs+To disable debugging of TACACS+, use the no debug tacacs+ command.1480 Security
