Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the C-Series and S-Series.Version 7.6.1.0 Introduced on the E-Series.ip igmp immediate-leaveEnable IGMP immediate leave.S4810Syntax ip igmp immediate-leave [group-list prefix-list-name]To disable ip igmp immediate leave, use the no ip igmp immediate-leave command.Parameters group-listprefix-list-nameEnter the keywords group-list then a string up to 16characters long of the prefix-list-name.Defaults Not configured.CommandModesINTERFACECommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the S-Series.Version 7.7.1.0 Introduced on the C-Series.E-Series legacycommandInternet Group Management Protocol (IGMP) 713
