Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 8.2.1.0 Introduced on the S-Series.Version 7.8.1.0 Introduced on the C-Series.UsageInformationWhen you enable this command, if a Policy Map containing classification rules (ACLand/or dscp/ ip-precedence rules) is applied to more than one physical interfaceon the same port pipe, only a single copy of the policy is written (only one FP entryis used).NOTE: An ACL itself may still require more that a single FP entry, regardless ofthe number of interfaces. For more information, refer to the “IP AccessControl Lists”, “Prefix Lists”, and “Route-map” sections in the Dell NetworkingOS Configuration Guide.show cam-aclDisplay the details of the CAM profiles on the chassis and all line cards.S4810Syntax show cam-aclDefaults noneCommandModesEXEC PrivilegeCommandHistoryThis guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.The following is a list of the Dell Networking OS version history for this command.Version 9.0.2.0 Introduced on the S6000.Version8.3.19.0Introduced on the S4820T.Version 8.3.11.1 Introduced on the Z9000.Version 8.3.7.0 Introduced on the S4810.Version 7.8.1.0 Introduced on the C-Series.UsageInformationThe display reflects the settings implemented with the cam-acl command.502 Content Addressable Memory (CAM)
