UARTx_WP7816A_T1 field descriptionsField DescriptionBWI_H Block Wait Time Integer High (C7816[TTYPE] = 1)Used to calculate the value used for the BWT counter. This register field provides the most significant byteof the 16 bit Block Wait Time Integer field BWI formed by {WP7816A_T1[BWI_H], WP7816B_T1[BWI_L]}.The value of BWI = 0 is invalid and should not be programmed. This value is used only whenC7816[TTYPE] = 1. See Wait time and guard time parameters.38.4.25 UART 7816 Wait Parameter Register B (UARTx_WP7816B_T0)The WP7816B_T0 register contains constants used in the generation of various wait timecounters. To save register space, this register is used differently when C7816[TTYPE] =0 and C7816[TTYPE] = 1. This register may be read at any time. This register must bewritten to only when C7816[ISO_7816E] is not set.Address: 4006_C000h base + 3Dh offset = 4006_C03DhBit 7 6 5 4 3 2 1 0Read WI_LWriteReset 0 0 0 1 0 1 0 0UARTx_WP7816B_T0 field descriptionsField DescriptionWI_L Wait Time Integer Low (C7816[TTYPE] = 0)Used to calculate the value used for the WT counter. This register field provides the least significant byteof the 16 bit Wait Time Integer field WI formed by {WP7816A_T0[WI_H], WP7816B_T0[WI_L]} . The valueof WI = 0 is invalid and must not be programmed. This value is used only when C7816[TTYPE] = 0. SeeWait time and guard time parameters.38.4.26 UART 7816 Wait Parameter Register B (UARTx_WP7816B_T1)The WP7816B_T1 register contains constants used in the generation of various wait timecounters. To save register space, this register is used differently when C7816[TTYPE] =0 and C7816[TTYPE] = 1. This register may be read at any time. This register must bewritten to only when C7816[ISO_7816E] is not set.Address: 4006_C000h base + 3Dh offset = 4006_C03DhBit 7 6 5 4 3 2 1 0Read BWI_LWriteReset 0 0 0 1 0 1 0 0Memory map and registersKL27 Sub-Family Reference Manual , Rev. 5, 01/2016706 Freescale Semiconductor, Inc.
