FLEXIO_TIMCFGn field descriptions (continued)Field Description10 Decrement counter on Pin input (both edges), Shift clock equals Pin input.11 Decrement counter on Trigger input (both edges), Shift clock equals Trigger input.19ReservedThis field is reserved.This read-only field is reserved and always has the value 0.18–16TIMRSTTimer ResetConfigures the condition that causes the timer counter (and optionally the timer output) to be reset. In 8-bitcounter mode, the timer reset will only reset the lower 8-bits that configure the baud rate. In all othermodes, the timer reset will reset the full 16-bits of the counter.000 Timer never reset001 Reserved010 Timer reset on Timer Pin equal to Timer Output011 Timer reset on Timer Trigger equal to Timer Output100 Timer reset on Timer Pin rising edge101 Reserved110 Timer reset on Trigger rising edge111 Timer reset on Trigger rising or falling edge15ReservedThis field is reserved.This read-only field is reserved and always has the value 0.14–12TIMDISTimer DisableConfigures the condition that causes the Timer to be disabled and stop decrementing.000 Timer never disabled001 Timer disabled on Timer N-1 disable010 Timer disabled on Timer compare011 Timer disabled on Timer compare and Trigger Low100 Timer disabled on Pin rising or falling edge101 Timer disabled on Pin rising or falling edge provided Trigger is high110 Timer disabled on Trigger falling edge111 Reserved11ReservedThis field is reserved.This read-only field is reserved and always has the value 0.10–8TIMENATimer EnableConfigures the condition that causes the Timer to be enabled and start decrementing.000 Timer always enabled001 Timer enabled on Timer N-1 enable010 Timer enabled on Trigger high011 Timer enabled on Trigger high and Pin high100 Timer enabled on Pin rising edge101 Timer enabled on Pin rising edge and Trigger high110 Timer enabled on Trigger rising edge111 Timer enabled on Trigger rising or falling edge7–6ReservedThis field is reserved.This read-only field is reserved and always has the value 0.Table continues on the next page...Chapter 39 FlexIOKL27 Sub-Family Reference Manual , Rev. 5, 01/2016Freescale Semiconductor, Inc. 765
