NXP Semiconductors LPC43 Series User Manual

Contents

NXP Semiconductors LPC43 Series User Manual Manual pdf 200 page image

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.User manual Rev. 1.3 — 6 July 2012 200 of 1269NXP Semiconductors UM10503Chapter 14: LPC43xx Pin configurationP7_1 C14 C13 - 162 113 [3] N;PUI/O GPIO3[9] — General purpose digital input/output pin.O CTOUT_15 — SCT output 15. Match output 3 of timer 3.I/O I2S0_TX_WS — Transmit Word Select. It is driven by themaster and received by the slave. Corresponds to thesignal WS in the I 2S-bus specification.O LCD_VD19 — LCD data.O LCD_VD7 — LCD data.- R — Function reserved.O U2_TXD — Transmitter output for USART2.I/O SGPIO5 — General purpose digital input/output pin.P7_2 A16 A14 - 165 115 [3] N;PUI/O GPIO3[10] — General purpose digital input/output pin.I CTIN_4 — SCT input 4. Capture input 2 of timer 1.I/O I2S0_TX_SDA — I2S transmit data. It is driven by thetransmitter and read by the receiver. Corresponds to thesignal SD in the I2 S-bus specification.O LCD_VD18 — LCD data.O LCD_VD6 — LCD data.- R — Function reserved.I U2_RXD — Receiver input for USART2.I/O SGPIO6 — General purpose digital input/output pin.P7_3 C13 C12 - 167 117 [3] N;PUI/O GPIO3[11] — General purpose digital input/output pin.I CTIN_3 — SCT input 3. Capture input 1 of timer 1.- R — Function reserved.O LCD_VD17 — LCD data.O LCD_VD5 — LCD data.- R — Function reserved.- R — Function reserved.- R — Function reserved.P7_4 C8 C6 - 189 132 [6] N;PUI/O GPIO3[12] — General purpose digital input/output pin.O CTOUT_13 — SCT output 13. Match output 3 of timer 3.- R — Function reserved.O LCD_VD16 — LCD data.O LCD_VD4 — LCD data.O TRACEDATA[0] — Trace data, bit 0.- R — Function reserved.- R — Function reserved.AI ADC0_4 — ADC0, input channel 4. Configure the pin asGPIO input and use the ADC function select register in theSCU to select the ADC.Table 129. Pin description …continuedLCD, Ethernet, USB0, and USB1 functions are not available on all parts.SymbolLBGA256TFBGA180TFBGA100LQFP208[1]LQFP144Reset state[2]TypeDescription