NXP Semiconductors LPC43 Series User Manual

Contents

NXP Semiconductors LPC43 Series User Manual Manual pdf 323 page image

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.User manual Rev. 1.3 — 6 July 2012 323 of 1269NXP Semiconductors UM10503Chapter 16: LPC43xx Global Input Multiplexer Array (GIMA)16.4.22 SCT CTIN_5 capture input multiplexer (CTIN_5_IN)16.4.23 SCT CTIN_6 capture input multiplexer (CTIN_6_IN)Table 171. SCT CTIN_5 capture input multiplexer (CTIN_5_IN, address 0x400C 7054) bitdescriptionBit Symbol Value Description Reset value0 INV Invert input 00 Not inverted.1 Input inverted.1 EDGE Enable rising edge detection 00 No edge detection.1 Rising edge detection enabled.2 SYNCH Enable synchronization 00 Disable synchronization.1 Enable synchronization.3 PULSE Enable single pulse generation. 00 Disable single pulse generation.1 Enable single pulse generation.7:4 SELECT Select input. Values 0x3 to 0xF are reserved. 00x0 CTIN_50x1 USART2 RX active0x2 SGPIO12_DIV31:8 - Reserved -Table 172. SCT CTIN_6 capture input multiplexer (CTIN_6_IN, address 0x400C 7058) bitdescriptionBit Symbol Value Description Reset value0 INV Invert input 00 Not inverted.1 Input inverted.1 EDGE Enable rising edge detection 00 No edge detection.1 Rising edge detection enabled.2 SYNCH Enable synchronization 00 Disable synchronization.1 Enable synchronization.3 PULSE Enable single pulse generation. 00 Disable single pulse generation.1 Enable single pulse generation.