NXP Semiconductors LPC43 Series User Manual

Contents

NXP Semiconductors LPC43 Series User Manual Manual pdf 210 page image

UM10503 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.User manual Rev. 1.3 — 6 July 2012 210 of 1269NXP Semiconductors UM10503Chapter 14: LPC43xx Pin configurationPC_2 F6 - - 13 - [3] N;PUI/O USB1_ULPI_D6 — ULPI link bidirectional data line 6.- R — Function reserved.I U1_CTS — Clear to Send input for UART 1.O ENET_TXD2 — Ethernet transmit data 2 (MII interface).I/O GPIO6[1] — General purpose digital input/output pin.- R — Function reserved.- R — Function reserved.O SD_RST — SD/MMC reset signal for MMC4.4 card.PC_3 F5 - - 11 - [6] N;PUI/O USB1_ULPI_D5 — ULPI link bidirectional data line 5.- R — Function reserved.O U1_RTS — Request to Send output for UART 1. Can alsobe configured to be an RS-485/EIA-485 output enablesignal for UART 1.O ENET_TXD3 — Ethernet transmit data 3 (MII interface).I/O GPIO6[2] — General purpose digital input/output pin.- R — Function reserved.- R — Function reserved.O SD_VOLT1 — SD/MMC bus voltage select output 1.AI ADC1_0 — ADC1, input channel 0. Configure the pin asGPIO input and use the ADC function select register in theSCU to select the ADC.PC_4 F4 - - 16 - [3] N;PU- R — Function reserved.I/O USB1_ULPI_D4 — ULPI link bidirectional data line 4.- R — Function reserved.ENET_TX_EN — Ethernet transmit enable (RMII/MIIinterface).I/O GPIO6[3] — General purpose digital input/output pin.- R — Function reserved.I T3_CAP1 — Capture input 1 of timer 3.I/O SD_DAT0 — SD/MMC data bus line 0.PC_5 G4 - - 20 - [3] N;PU- R — Function reserved.I/O USB1_ULPI_D3 — ULPI link bidirectional data line 3.- R — Function reserved.O ENET_TX_ER — Ethernet Transmit Error (MII interface).I/O GPIO6[4] — General purpose digital input/output pin.- R — Function reserved.I T3_CAP2 — Capture input 2 of timer 3.I/O SD_DAT1 — SD/MMC data bus line 1.Table 129. Pin description …continuedLCD, Ethernet, USB0, and USB1 functions are not available on all parts.SymbolLBGA256TFBGA180TFBGA100LQFP208[1]LQFP144Reset state[2]TypeDescription