Security Commands 1011Syntaxshow captive-portal user [user-id]• user-id — User ID (Range: 1–128).Default ConfigurationThere is no default configuration for this command.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesThere are no user guidelines for this command.Exampleconsole#show captive-portal userSessionUser ID User Name Timeout Group ID Group Name------- --------------------- ------- ------------ ------------1 user123 14400 1 Default2 user234 0 1 Default2 group2console#show captive-portal user 1User ID........................................ 1User Name...................................... user123Password Configured............................ YesSession Timeout................................ 0Group ID Group Name-------- --------------------------------1 Default2 group2user groupUse the user group command to associate a group with a captive portal user.Use the “no” form of this command to disassociate a group and user. A usermust be associated with at least one group so the last group cannot bedisassociated.
