Layer 2 Switching Commands 555User GuidelinesThe optional ex-pse (extended PSE) and ex-pd (extended PD) parameters areonly available on PoE capable switches.Default ValueBy default, the capabilities and network policy TLVs are included in LLDPpackets sent on interfaces enabled for MED. On PoE capable switches, theextended PD TLV and extended PSE TLV are transmitted.Exampleconsole(config)#interface gigabitethernet 1/0/1console(config-if-Gi1/0/1)#lldp med transmit-tlv capabilitiesconsole(config-if-Gi1/0/1)#lldp med transmit-tlv network-policieslldp notificationUse the lldp notification command in Interface Configuration mode toenable remote data change notifications. To disable notifications, use the noform of this command.Syntaxlldp notificationno lldp notificationDefault ConfigurationBy default, notifications are disabled on all supported interfaces.Command ModeInterface Configuration (Ethernet) modeUser GuidelinesThis command has no user guidelines.ExampleThe following example displays how to enable remote data changenotifications.
