Layer 2 Switching Commands 304Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays the addresses in the Forwarding Database:console#show mac address-table countCapacity: 8192Used: 109Static addresses: 2Secure addresses: 1Dynamic addresses: 97Internal addresses: 9show mac address-table dynamicUse the show mac address-table command in User Exec or Privileged Execmode to display all dynamic entries in the bridge-forwarding database.Syntaxshow mac address-table dynamic [address mac-address] [interface interface-id] [vlan vlan-id]• mac-address —A MAC address in the format xxxx.xxxx.xxxx.• interface-id —Display information for a specific interface. Valid interfacesinclude Ethernet ports and port channels.• vlan-id —Display entries for the specific VLAN only. The range is 1 to 4093.Default ConfigurationThis command has no default configuration.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodes
