Layer 2 Switching Commands 594Syntaxshow vpc consistency-features { global | interface port-channel-number }• port-channel-number—A valid port-channel identifier.Default ConfigurationThere is no default configuration for this command.Command ModesPrivileged Exec mode and aboveUser GuidelinesThere are no user guidelines for this command.show vpc peer-keepaliveUse the show vpc peer-keepalive command to display the peer MLAGswitch’s IP address used by the Dual Control Plane Detection Protocol. Theport used for the Dual Control Plane Detection Protocol is shown, as well as ifpeer detection is enabled or not. If enabled, the detection status is displayed.Syntaxshow vpc peer-keepaliveDefault ConfigurationThere is no default configuration for this command.Command ModesPrivileged Exec mode and aboveUser GuidelinesA VPC domain ID must be configured for this command to display thekeepalive status.Example(Switching) # show vpc peer-keepalive
