Layer 3 Routing Commands 1320Command HistoryIntroduced in version 6.2.0.1 firmware.Modified in version 6.3.0.1 firmware.Exampleconsole# show bgp ipv6 aggregate-addressPrefix/Len AS Set Summary Only Active---------------- ------ ------------ ------2001:DB8::/48 N Y Y3ffe:4000:1::/48 N Y Yshow bgp ipv6 communityUse this command to display IPv6 routes that belong to the specified set ofcommunities. This command replaces and deprecates the show ipv6 bgpcommunity commandSyntaxshow bgp ipv6 community communities [ exact-match ]• communities—A string of zero or more community values, which may bein either format and may contain the well-known community keywords no-advertise and no-export. The output displays routes that belong to everycommunity specified in the command.• exact-match— Only displays routes that are members of those and onlythose communities specified in the command.Field DescriptionPrefix/Len Destination prefix and prefix length.AS Set Indicates if an empty AS path is advertised with theaggregate address (N) or an AS SET is advertised withthe set of AS numbers for the paths contributing to theaggregate (Y).Summary Only Indicates if the individual networks are suppressed (Y)or advertised (N).Active Indicates if the aggregate is currently being advertised.
