Layer 2 Switching Commands 547no depends-on intf-list• intf-list — List of Ethernet interface identifiers or port channel interfaceidentifiers or ranges.Separate nonconsecutive items with a comma and nospaces. Use a hyphen to designate the range of ports or port-channelnumbers.Default ConfigurationThis command has no default configuration.Command ModeLink Dependency modeUser GuidelinesCircular dependencies are not allowed, i.e. interfaces added to the group maynot also appear in the depends-on list of the same group or a different group.If an interface appears in the add list of any group, the interfaces in thecorresponding depends-on list may not refer back to the interfaces in the addgroup.Examplesconsole(config-linkDep-group-1)#depends-on gigabitethernet 1/0/10console(config-linkDep-group-1)#depends-on port-channel 6show link-dependencyUse the show link-dependency command to show the link dependenciesconfigured for a particular group. If no group is specified, then all theconfigured link-dependency groups are displayed.Syntaxshow link-dependency [group GroupId] [detail]• GroupID—Link dependency group identifier. (Range: Valid Group Id, 1–16)• detail—Show detailed information about the state of members and thedependent ports.
