Layer 2 Switching Commands 335show dhcp l2relay remote-id vlanUse the show dhcp l2relay remote-id vlan command to display whetherDHCP L2 Relay is globally enabled and shows the remote ID configured onthe specified VLAN or VLAN range.Syntaxshow dhcp l2relay remote-id vlan vlan-list• vlan-list—Show information for the specified VLAN range . List separate, non-consecutive VLAN IDs separated by commas (without spaces). Use ahyphen to designate a range of IDs. (Range: 1–4093)Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesThere are no user guidelines for this command.Exampleconsole#show dhcp l2relay remote-id vlan 200DHCP L2 Relay is Enabled.VLAN ID Remote Id-------- -------------200 remote_22clear dhcp l2relay statistics interfaceUse the show dhcp l2relay statistics interface command to reset the DHCPL2 Relay counters to zero. Specify the port with the counters to clear, or usethe all keyword to clear the counters on all ports.Syntaxclear dhcp l2relay statistics interface {all | interface-id}
