Switch Management Commands 1833Syntaxboot host auto-saveno boot host auto-saveDefault ConfigurationThe default value is disabled.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelinesExampleconsole#console#configureconsole(config)#boot host auto-saveconsole(config)#no boot host auto-saveboot host dhcpUse the boot host dhcp command in Global Configuration mode to enableAuto-Install and Auto Configuration on the switch. When a switch bootswith a saved startup configuration that includes this command, the Auto-Install process is triggered. Use the no form of this command to disable Auto-Install on the next reboot if the reboot occurs with a saved startupconfiguration. If you give this command while the Auto-Install process isrunning, the Auto-Install process terminates. The Auto-Install process has aninternal timer that retries failed installations for ten minutes.Syntaxboot host dhcpno boot host dhcpDefault ConfigurationThe default value is Enabled.
