Layer 2 Switching Commands 80410 myspan Te1/0/1 StaticRSPAN Vlan------------------------------------------------------------------Enabledshow vlan association macUse the show vlan association mac command to display the VLAN associatedwith a specific configured MAC address. If no MAC address is specified, theVLAN associations of all the configured MAC addresses are displayed.Syntaxshow vlan association mac [mac-address]• mac-address — Specifies the MAC address to be entered in the list.(Range: Any valid MAC address)Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser Guidelines• MAC Address—The configured MAC address• VLAN —The associated VLAN identifierExampleThe following example shows no entry in MAC address to VLAN cross-reference.console#show vlan association macMAC Address VLAN ID----------------------- -------0001.0001.0001.0001 1
