Layer 3 Routing Commands 1349Command ModePrivileged Exec and Global Config modesUser GuidelinesThe following fields are displayed.Command HistoryIntroduced in version 6.3.0.1 firmware.Exampleconsole#show ip bgp extcommunity-list 1Standard extended community-list list1permit RT:1:100 RT:2:100deny RT:6:600permit RT:5:200permit SOO:9:900show ip bgp listen rangeUse the show ip bgp listen range command to display information about IPv4BGP listen ranges.Syntaxshow ip bgp [vrf vrf-name] listen range [ network/length ]• network/length — Displays information about the specified listen range.• vrf-name—The name of a previously configured VRF.Field DescriptionStandard extendedcommunity-listThe standard named extended community list.permit Permits access for a matching condition. Once a permitvalue has been configured to match a given set ofextended communities the extended community listdefaults to an implicit deny for all other values.RT The route target extended community attribute.deny Denies access for a matching condition.
