Layer 3 Routing Commands 1466Default ConfigurationRate limiting is enabled by default.The default burst-interval is 1000 milliseconds.The default burst-size is 100 messages.Command ModeGlobal Configuration mode, Virtual Router Configuration modeUser GuidelinesThere are no user guidelines for this command.When in Virtual Router Configuration mode, this command operates withinthe context of the virtual router instance. When in Global Configurationmode, the command operates on the global router instance.Virtual Router Configuration mode is only available on theN3000/N3100/N4000 switches.Exampleconsole(config)#ip icmp error-interval 1000 20ip netdirbcastUse the ip netdirbcast command in Interface Configuration mode to enablethe forwarding of network-directed broadcasts. When enabled, networkdirected broadcasts are forwarded. When disabled they are dropped. Use theno form of the command to disable the broadcasts.Syntaxip netdirbcastno ip netdirbcastDefault ConfigurationDisabled is the default configuration.Command ModeInterface Configuration (VLAN) mode
