Dell EMC Networking CLI 109Ethernet Configurationip arp inspection validate Enables additional validation checks like sourceMAC address validation, destination MACaddress validation or IP address validation onthe received ARP packets.GCip arp inspection vlan Enables Dynamic ARP Inspection on a singleVLAN or a range of VLANs.GCpermit ip host mac host Configures a rule for a valid IP address andMAC address combination used in ARP packetvalidation.ARPAshow arp access-list Displays the configured ARP ACLs with therules.PEshow ip arp inspection Displays the Dynamic ARP Inspectionconfiguration.PE12 Enabled Disabled Displays the Dynamic ARP Inspectionconfiguration on all the VLANs in the givenVLAN range.PEa. For the meaning of each Mode abbreviation, see Mode Types .Command Description Mode aclear counters Clears statistics on an interface or globally. PEdescription Adds a description to an interface. ICflowcontrol Configures the flow control on a given interface. GC orICinterface Enters the interface configuration mode toconfigure parameters for an interface.GC orICinterface range Enters the interface configuration mode toexecute a command on multiple ports at thesame time.GC orIC orIRlink debounce time Configures the debounce timer for one ormultiple interfaces.IC orIRCommand Description Mode a
