Switch Management Commands 1911• hybrid (h-node)Exampleconsole(config-dhcp-pool)#netbios-node-type h-nodenetworkUse the network command in IP DHCP Pool Configuration mode to define apool of IPv4 addresses for distributing to clients.Syntaxnetwork network-number [mask | prefix-length]• network-number—A valid IPv4 address• mask—A valid IPv4 network mask with contiguous left-aligned bits.• prefix-length—An integer indicating the number of leftmost bits in thenetwork-number to use as a prefix for allocating cells.Default ConfigurationThis command has no default configuration.Command ModeIP DHCP Pool Configuration modenext-serverUse the next-server command in DHCP Pool Configuration mode to set theIPv4 address of the TFTP server to be used during auto-install. Use the noform of the command to remove the next server configuration.Syntaxnext-server ip-addressno next-server• ip-address—The IPv4 address of the TFTP server to use during auto-configuration.
