Switch Management Commands 2086Exampleconsole(config)#show sflow 1 destinationReceiver Index................................. 1Owner String................................... asdTime out....................................... No TimeoutIP Address:.................................... 1.2.3.4Address Type................................... 1Port........................................... 6343Datagram Version............................... 5Maximum Datagram Size.......................... 1400show sflow pollingUse the show sflow polling command to display the sFlow polling instancescreated on the switch.Syntaxshow sflow rcvr-index polling [{gigabitethernet | tengigabitethernet |fortygigabitethernet} interface-list]• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).• interface-list — The list of interfaces to poll, in unit/slot/port format.Owner String The identity string for receiver, the entity making use of thissFlowRcvrTable entry.Time Out The time (in seconds) remaining before the receiver is releasedand stops sending samples to sFlow receiver.IP Address The destination IP address (the sFlow receiver host).Address Type 1 for IPv4 and 2 for IPv6.Port The destination Layer4 UDP port for sFlow datagrams.Datagram Version The sFlow record format version. For example, 5 indicates sFlowversion 5.MaximumDatagram SizeThe maximum number of bytes that can be sent in a single sFlowdatagram.
