Layer 3 Routing Commands 1584Exampleconsole#show ip mfcMFC IPv4 Mode.................................. DisabledMFC IPv6 Mode.................................. DisabledMFC Entry Count................................ 0Current multicast IPv4 protocol................ PIMSMCurrent multicast IPv6 protocol................ No protocol enabled.Total software forwarded packets............... 0-------------------- -------------------- ---------- --------------Source Address Group Address Protocol PktsForwarded in SW-------------------- -------------------- ---------- --------------192.168.28.4 232.1.2.3 PIM-SM 61show ip multicastUse the show ip multicast command to display the system-wide multicastinformation.Syntaxshow ip multicastDefault ConfigurationThis command has no default configuration.Field DescriptionMFC IPv4 Mode Enabled when IPv4 Multicast routing is operational.MFC IPv6 Mode Enabled when IPv6 Multicast routing is operational.MFC Entry Count The number of entries present in MFC.Total Pkts Forwarded inSWTotal Number of multicast packets forwarded in software.Source Address Source address of the multicast route entry.Group Address Group address of the multicast route entry.Protocol The current operating multicast routing protocol.Pkts Forwarded in SW Number of multicast packets that are forwarded in softwarefor a specific multicast route entry.
