Layer 3 Routing Commands 1687Area LSA Checksum.............................. 0OSPF NSSA Specific Information.Import Summary LSAs............................ EnableRedistribute into NSSA......................... EnableDefault Information Originate.................. TRUEDefault Metric................................. 250Default Metric Type............................ Non-ComparableTranslator Role................................ CandidateTranslator Stability Interval.................. 2000Translator State............................... DisabledExample #3The following example shows the length of the area’s flood queue for LSAswaiting to be flooded within the area.console #show ip ospf area 1AreaID......................................... 0.0.0.1External Routing............................... Import External LSAsSpf Runs....................................... 10Area Border Router Count....................... 0Area LSA Count................................. 3004Area LSA Checksum.............................. 0x5e0abedFlood List Length.............................. 0Import Summary LSAs............................ Enableshow ip ospf asbrThe show ip ospf asbr command displays the internal OSPF routing tableentries to Autonomous System Boundary Routes (ASBR). This commandtakes no options.Syntaxshow ip ospf asbr [vrf vrf-name]• vrf-name—The name of the VRF instance on which the commandoperates. If no VRF parameter is given, information for the default(global) router instance is shown.Default ConfigurationThis command has no default configuration.
