Switch Management Commands 20151 Gi1/0/1 30 50 50 CLI2 Gi1/0/1 1800 50 50 Managershow rmon eventsUse the show rmon events command in User Exec mode to display theRMON event table. Also see the rmon event command.Syntaxshow rmon eventsDefault ConfigurationThis command has no default configuration.Command ModeUser Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesThe following table describes the significant fields shown in the display:Field DescriptionIndex An index that uniquely identifies the event.Description A comment describing this event.Type The type of notification that the device generates about this event.Can have the following values: none, log, trap, log-trap. In the caseof log, an entry is made in the log table for each event. In the case oftrap, an SNMP trap is sent to one or more management stations.Community If an SNMP trap is to be sent, it is sent to the SNMP communityspecified by this octet string.Owner The entity that configured this event.Last time sent The time this entry last generated an event. If this entry has notgenerated any events, this value is zero.
