Switch Management Commands 2133If enabled, the CLI command logger subsystem begins to log commandsimmediately after the user is authenticated. After authentication, the CLIgenerates an explicit message and invokes the command logger. The format ofthe message at login is:<189> JAN 10 18:58:56 10.27.21.22-2 CMDLOGGER[209809328]:cmd_logger_api.c(83) 361 %% CLI:10.27.21.22:admin:User admin logged in<190> JAN 10 18:58:56 10.27.21.22-2 CLI_WEB[209809328]:cmd_logger_api.c(260) 362 %% [CLI:admin:10.27.21.22] User has successfullylogged inThe CLI command log subsystem also logs all user log out instances. Theformat of the log message is:<190> JAN 10 19:01:04 10.27.21.22-2 CLI_WEB[209809328]:cmd_logger_api.c(260) 382 %% [CLI:admin:10.27.21.22] User has logged outCommands in this SectionThis section explains the following commands:clear loggingUse the clear logging command to clear messages from the internal loggingbuffer.clear logging logging monitorclear logging file logging ondescription (Logging) logging protocollevel logging snmplogging cli-command logging source-interfacelogging logging trapslogging audit logging web-sessionlogging buffered portlogging console show logginglogging facility show logging filelogging file show syslog-servers– terminal monitor
