Audio Visual Bridging Commands 1092MSRP must also be enabled globally in order to become operational.This command is only available on the N4000 Series switches.Command HistoryIntroduced in version 6.2.0.1 firmware.ExampleThis example enables MSRP on interface Gi1/0/1console(config)#interface gi1/0/1console(config-if-Gi1/0/1)#msrpmsrp boundary-propagateUse this command to configure the IEEE 802.1Qav boundary propagation.Use the no form of the command set the class configuration to the default.Syntaxmsrp boundary-propagateno msrp boundary-propagateDefault ConfigurationTalkers on a boundary port are ignored by default.Command ModeGlobal Configuration modeUser GuidelinesUse the boundary propagation configuration to administratively define theedge of the IEEE 802.1Qav domain. Disable boundary propagation to ignoretalkers on boundary ports.Boundary propagation can only be configured when MSRP is globallydisabled.Command HistoryIntroduced in version 6.2.0.1 firmware.
