Switch Management Commands 2032debug consoleUse the debug console to enable the display of “debug” trace output on thelogin session in which it is executed. Debug console display must be enabledin order to view any trace output. The output of debug trace commandsappears on all login sessions for which debug console has been enabled. Theconfiguration of this command remains in effect for the life of the loginsession. The effect of this command is not persistent across resets.Syntaxdebug consoleDefault ConfigurationDisplay of debug traces is disabled by default.Command ModePrivileged Exec mode.User GuidelinesDebug output should be enabled with caution. Switch behavior may beadversely affected by the additional processing load incurred from enablingdebug.Exampleconsole#debug consoledebug crashlogUse this command to display the crash log contents on the console.Syntaxdebug crashlog {crashlog-index | proc | kernel crashlog-index | datacrashlog-index [comp-id] [item-number] [add-param] [add-param] |deleteall} [unit unit-index]• crashlog-index—Indicates which crash log to display. The range is 0-4. 0indicates the most recent log and 4 specifies the oldest log.
