Switch Management Commands 2145logging monitorUse the logging monitor command in Global Configuration mode to enablelogging messages to telnet and SSH sessions with the default severity level.Use the no logging monitor command to disable logging messages.Syntaxlogging monitor severityno logging monitor• severity—(Optional) The number or name of the desired severity level.Range:– [0 | emergencies]– [1 | alerts]– [2 | critical]– [3 | errors]– [4 | warnings]– [5 | notifications]– [6 | informational]– [7 | debugging]Default ConfigurationThe default logging monitor severity level is warnings. By default, loggingmessages are not displayed on SSH or telnet sessions (no logging monitorwarnings). Logging messages are displayed by default on console sessions(serial and out-of-band ports).Command ModeGlobal Configuration modeUser GuidelinesMessages logged to the console are filtered based on severity. Selecting aseverity level will log that severity and higher (numerically lower) levelmessages.
