Dell EMC Networking CLI 158bgp cluster-id Specifies the cluster ID of a route reflector. BRbgp default local-preference Enables the network operator to specify thedefault local preference.BRbgp fast-external-fallover Configures BGP to immediately reset theadjacency with an external peer if the routinginterface to the peer goes down.BRbgp fast-internal-fallover Configures BGP to immediately reset theadjacency with an internal peer when there is aloss of reachability to an internal peer.BRbgp listen Creates an IPv4 listen range and associates itwith the specified peer template.BR,IPAFbgp log-neighbor-changes Enables logging of adjacency state changes. BRbgp maxas-limit Specifies a limit on the length of AS Paths thatBGP accepts from its neighbors.BRbgp router-id Sets the BGP router ID. BRclear ip bgp Resets peering sessions with all of a subnet ofBGP peers.PEclear ip bgp counters Resets all BGP counters to 0. PEdefault-informationoriginate (BGP RouterConfiguration)Enables BGP to originate a default route. BRdefault-informationoriginate (IPv6 AddressFamily Configuration)Allows BGP to originate an IPv6 default route. IPAFdefault metric (BGP RouterConfiguration)Sets the value of the MED attribute on routesredistributed into BGP when no metric hasbeen specified.BRdefault metric (IPv6 AddressFamily Configuration)Sets the metric of redistributed IPv6 routeswhen a metric is not configured in theredistribute command.IPAFdistance Sets the preference of BGP routes to specificdestinations.IPAFCommand Description Mode a
