Security Commands 999groupUse the group command to configure the group number for a captive portalconfiguration. If a group number is configured, the user entry (Local orRADIUS) must be configured with the same name and the group toauthenticate to this captive portal instance. Use the no form of thiscommand to reset the group number to the default.Syntaxgroup group-numberno group• group-number — The number of the group to associate with thisconfiguration (Range: 1–10).Default ConfigurationThe default group number is 1.Command ModeCaptive Portal Instance mode.User GuidelinesThere are no user guidelines for this command.Exampleconsole(config-cp 2)#group 2interfaceUse the interface command to associate an interface with a captive portalconfiguration. Use the no form of this command to remove an association.Syntaxinterface interfaceno interface interface• interface — An interface or range of interfaces.
